Auger Boring and Drilling · Orange County
Auger Boring and Drilling in Maitland, FL
Maitland work for a drilling crew is the line that has to cross something it cannot cut through: a county road, a brick street, a resort lot, a canal between two lakes. A pit at each end, a steered bore between them, and the pipe or conduit is pulled back through with the surface untouched.
Serving Maitland · Orange County
Davis Underground Solutions, Inc.
Auger boring and drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Auger Boring and Drilling in Maitland: what gets installed
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Maitland jobs cluster along the I-4 and Maitland Boulevard office corridor: conduit between buildings, parking-lot crossings and lakefront services.
How a bore in Maitland is done
The job in Maitland starts before the rig arrives: the Sunshine 811 ticket, a walk of the alignment, and a bore plan that threads the marked utilities and anything the locate cannot see. The pilot hole is drilled with a steerable head and tracked from the surface rod by rod, reamed to size, and the product is pulled back through in one pass. The sand bores fast; the fluid holds the hole below the water table.
Hiring a auger boring and drilling contractor in Maitland
The crew that drills Maitland should have drilled Florida sand with the water table at its feet before; the ground and the permit agencies here are not the same as the next county over. Davis Underground Solutions, Inc. owns its rigs and crews and quotes from a site walk, and the estimate costs nothing.
The full write-up for the county is on the auger boring and drilling page for Orange County.
Estimates are free. Call now: (855) 520-2670.
Questions about auger boring and drilling in Maitland
Push length?+
60 to 200 feet in one push covers most crossings; longer calls for two pits and a mid-crossing structure.
Push length?+
60 to 200 feet in one push covers most crossings; longer calls for two pits and a mid-crossing structure.
Will the bore damage my driveway or landscaping in Maitland?+
No. The surface between the two pits is never opened; the pits are small, the drilling fluid is contained with a vac truck, and the pits are restored when the line is in.
Other drilling and boring services in Maitland
Directional Drilling Maitland
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Horizontal Drilling Maitland
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Directional Boring Maitland
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Underground Drilling Maitland
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Fiber Optic Cable Drilling Maitland
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Electrical Conduit Drilling Maitland
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Underground Conduit Drilling Maitland
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Maitland
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Utility Drilling Maitland
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Communications Drilling Maitland
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Maitland
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Sewer, Water and Drain Lines Maitland
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Maitland ZIP codes served
32751, 32794
Auger Boring and Drilling in nearby Orange County communities
- Auger Boring and Drilling Orlo Vista
- Auger Boring and Drilling Paradise Heights
- Auger Boring and Drilling Pine Castle
- Auger Boring and Drilling Pine Hills
- Auger Boring and Drilling Sky Lake
- Auger Boring and Drilling South Apopka
- Auger Boring and Drilling Southchase
- Auger Boring and Drilling Taft
- Auger Boring and Drilling Tangelo Park
- Auger Boring and Drilling Tangerine
- Auger Boring and Drilling Union Park
- Auger Boring and Drilling Wedgefield